Product Description
Item: Highest Quality Oregon 75Rd .063" 3/8 Ripping Chain
Note: If You Are Unsure Of Specs Most Info Should Be Printed On Your Bar, Or Call/Email Us And We Will Help.
Driver Count: The Number Of Drivers In Your Loop. Lay Chain On Flat Surface, Pull Tight So Loop Comes Together And Count Drivers By Two'S Then Add Drivers On The Ends.
Gauge: The Size Of The Groove In The Rail The Drivers Follow.
Pitch: Size Of Chain.
Specially Made For Ripping - Making Cuts Parallel To The Wood Grain. 75 Rd Has A Special Ripping Application Grind For Making Dimensional Boards And Planks From Larger Timbers. For Use On Chain-Type Sawmills. Not Recommended For Hand-Held Use
- Lubritec Keeps Your Saw Chain And Guide Bar Oiled, For Less Friction And Longer Life
- Exclusive Ocs-01 Steel Delivers Greater Durability
Any Saw Mill Worker Will Tell You That Ripping Chain Is Different From All Other Saw Chains. You Need A Special Kind Of Chain Fro Ripping Cuts, The Kind That Transforms Raw Timber Into The Boards And Planks Used In Homes And Businesses. Oregon'S Ripcut Is Designed Specifically For Chain-Type Sawmills, Producing Smooth Cuts With Supreme Efficiency.
Ripcut'S Precise Ripping Cuts Give You A Smooth Surface Every Time You Cut Parallel To The Wood Grain. Ripcut Isn'T Recommended For Hand-Held Use, But That Suits Experienced Millwrights Just Fine
Select The Amount Of Drive Links In The Quantity, For Example If You Need A 72 Drive Length Chain Select 72 Qty In The Drop Down Selector.
Note: Warning: This Saw Chain Is Capable Of Kickback That Could Cause Serious Injury To The Chainsaw Operator Or Others. Only Use This Chain If You Have Experience And Specific Training In Handling And Preventing Kickback. Alternative Chain That Is Less Aggressive And Has Lower Kickback Properties Is Available.